robotics

Projects:-robotics
3 05, 2017

Web Control Rover featuring 4Duino-24

By | 3rd May, 2017|Categories: 4D Systems, Arduino, IoT, Projects, robotics|Tags: |0 Comments

The Web Control Rover is a project that will utilise the capabilities of the 4Duino-24. The on board WiFi module (ESP8266) of the 4Duino-24 is used to connect to the local area network and control the rover through another device by connecting it to the IP address of the rover. The rover can be controlled [...]

3 05, 2017

Candy Dispenser Featuring 4Duino – 24

By | 3rd May, 2017|Categories: 4D Systems, Arduino, Featured, Projects, robotics|Tags: |0 Comments

In this project, we will use the 4Duino-24 and Infrared sensors to create a candy dispenser. 4Duino-24 checks whether a food tray contains enough candy or not. Once the button on the display is touched it will send command to the servo motor to rotate, thus dispensing of the candy is done. You can also add IR [...]

3 05, 2017

Line Follower Rover

By | 3rd May, 2017|Categories: 4D Systems, Arduino, Projects, robotics|Tags: |0 Comments

This project is a simple line follower robot, where in we used the 4Duino-24 as the controller of the robot or rover. The rover will be on track of the line with the IR sensor giving the direction moving forward, left, right, reverse and stop.  How it works  Components 4Duino-24 3 Infrared Sensors Motor Driver [...]

24 04, 2017

Arlo : Motion Sensing Robot featuring 4Duino-24 and uLCD-220RD

By | 24th April, 2017|Categories: 4D Systems, Arduino, robotics|Tags: |0 Comments

  Arlo is a module which features two uLCD-220RD as eyes which can be control via serial connection. A 4Duino-24 is used as a mouth to make it like a face. The  4Duino-24 acts as a host which receives data from the ulrasonic sensor and sends command to the servo motor attached with Arlo.  This [...]