The Web Control Rover is a project that will utilise the capabilities of the 4Duino-24. The on board WiFi module (ESP8266) of the 4Duino-24 is used to connect to the local area network and control the rover through another device by connecting it to the IP address of the rover. The rover can be controlled [...]
In this project, we will use the 4Duino-24 and Infrared sensors to create a candy dispenser. 4Duino-24 checks whether a food tray contains enough candy or not. Once the button on the display is touched it will send command to the servo motor to rotate, thus dispensing of the candy is done. You can also add IR [...]
This project is a simple line follower robot, where in we used the 4Duino-24 as the controller of the robot or rover. The rover will be on track of the line with the IR sensor giving the direction moving forward, left, right, reverse and stop. How it works Components 4Duino-24 3 Infrared Sensors Motor Driver [...]
This project will show you how to make a simple valuable things or gadget protector. With the on-board WiFi of the 4Duino-24, we will be able to connect this project to internet and update the twitter of someone when another trying to steal our valuables thru thingSpeak. The uCAM-III will capture the image of the culprit as [...]
https://youtu.be/Rvi3-qmVJH0 In this project we will monitor the room temperature using TMP35 thermistor and 4Duino. The thermistor is an analog component able to read ambient temperature by either decreasing or increasing its resistance in response to temperature change. Hence it can detect surrounding temperature changes in real time. In this project 4Duino’s resistive [...]
Arlo is a module which features two uLCD-220RD as eyes which can be control via serial connection. A 4Duino-24 is used as a mouth to make it like a face. The 4Duino-24 acts as a host which receives data from the ulrasonic sensor and sends command to the servo motor attached with Arlo. This [...]
